30m EasyFit Pro CCTV Camera Cable
EasyFit Pro lead kits comprise of a length of 4 core cable fitted at one end with an industry standard BNC plug for connection to your control equipment i.e. your DVR and also an industry standard 2.1mm DC socket for you to connect your low voltage output camera power adaptor to.
The other end of the cable is terminated in a 6C4P RJ11 plug. This plug is under 13mm or ½” in diameter and will therefore fit through a hole of theses dimensions. Most common drills will only take a 13mm or ½” drill bit. This saves you looking for special tools to drill large and unsightly holes to feed your cable through.
The kit then comes with a little adaptor which is a ST3 ( RJ11 Socket) which converts to an industry standard BNC plug and an industry standard 2.1mm plug which enables connection of your cable to your camera.
These cables can be up to 50m in length without a significant drop in voltage and if used in environments without a lot of electrical interference minimal reduction in video signal quality.
We stock a range of 12v power adaptors of differing output ratings (ma) dependant on your cameras requirements to complement these easy fit lead kits.
Below is an example of how you connect your EasyFit Pro lead kit
