These cables offer excellent low loss video signals over distances upto 100m. The cables not only carry the video signal via a miniature RG59 specification but can also be used to provide power to the cameras as well.

The cable is fitted a one end with a industry standard BNC this connects to your control equipment i.e. DVR, also at the same end is an industry standard 2.1 mm DC socket for your to plug your camera power supply into.

The far end of the cable is bare wires which can then be fitted with the proper plugs or can be connected directly to the camera via a terminal block type connection.

Need advice please call us on 01609 775116