DVR Help Guide


 

This help guide is designed to help you discover and use all the functions on your DVR. To help you understand and use the functions of your recorder we have uploaded videos to YouTube, of us using the recorder and its functions.

 

To do these steps you will need to make sure your cameras, recorder and monitor are switched on and have power.You will also need to make sure you have a mouse connected to navigate around the recorder.

 

1.      Motion Detection.

Please click here for video.

 

 

2.      Email Notification Setup.

This can be used once you have set the Motion Detection up on our recorder, you will be able to follow this process to receive email when Motion Detection has been set off.

 Please click here for video.

 

3.       How to view your playback (recordings).

 Please click here for video.

 

4.      How to remove footage from you recorder.

For this video you will need to make sure you have a clean/empty USB stick and plug it into one of the USB ports on the machine. (There is one port at the front and one at the back). Please be aware, removing footage that’s longer than 10 minutes may take some time to be removed on to the USB.

Please click here for full detail video.

Please click here for short detail video.

 

6.      How to use your mask setting on your NVR

Please click here for video.

 

7.      Adding IP Cameras to your DVR

Please click here for video.

 

 

8.      Checking network settings on your DVR.

Please click here for video.

 

 

9.      Using the zoom tool while viewing your playback.

Please click here for video.

 

 

10.      Setting Speed Dome Presets and Cruise.

Please click here for video.

 

 

If you need any assistance with your DVR or system please call James or Kyle on 01748 811991.

Cart

Your Cart is Empty